Xerox Phaser 6360 Leaflet

The Tray 1 (MPT) prompt setting specifies the amount of time the prompt displays on the 
control panel after paper is loaded in the tray. The Tray 1 (MPT) prompt requests the user to 
confirm the current tray setup or to specify the correct paper type and size for the print job.

To select a Tray 1 (MPT) prompt setting, use one of the following options:

■

The printer’s control panel

■

CentreWare IS

To select the Tray 1 (MPT) prompt setting on the control panel:

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select the appropriate duration, and then press the OK button.

To select the Tray 1 (MPT) prompt setting using CentreWare IS:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Click Properties.

Select the General folder on the left navigation panel, and then select Printer Defaults.

Select the appropriate setting in the Tray 1 (MPT) Prompt drop-down list.

Click the Save Changes button at the bottom of the page.

Turns the tray setup prompt off.

(Factory default setting)

Displays the tray setup prompt for 30 seconds after paper is 
loaded in Tray 1 (MPT).

Displays the tray setup prompt after paper is loaded in 
Tray 1 (MPT) until a control panel selection is made. The printer 
will not print until a selection is made.