Xerox Phaser 5335 User Guide

6.3 Printing Problems

123

Printing takes too much time.

Is the [Graphics] tab > [Print Mode] on your print driver set to [High Quality]? Changing 

the [Print Mode] setting to [Standard] may improve print speed. 

Refer to
• Online help for the print driver

Printing may take time depending on the printing method for TrueType fonts. Change 

the printing method under the [Detailed Settings] tab > [Font Settings] on your print 

driver.

Refer to
• Online help for the print driver

When printing large data, or when it is taking too much time to print, enabling [Print 

Page Mode] on your print driver may improve print speed.

To use [Print Page Mode], install additional memory to the printer.

Refer to
• Print Page Mode: Online help for the print driver

Image loss occurs in the upper 

portion of the page. 

Printing does not start from the 

desired position on the page.

Are the paper guides adjusted properly?

Slide the paper guides to the correct positions.

Refer to
• "4.2 Loading Paper" (P. 62)

Check whether the margins are set correctly on your print driver.

Refer to
• Online help for the print driver

Requested 2-sided printing, 

but the printer prints 1-sided.

The duplex unit (optional) may not be installed properly.

Check if the duplex unit is plugged correctly into the connector on the printer.

Refer to
•

‘

Duplex Unit Installation Guide

’