Xerox Phaser 5335 User Guide

124

6 Troubleshooting

Output is too light.
(faded or unclear)

The paper is damp. Load fresh paper.

The paper is not appropriate for the printer. Load appropriate paper.

Refer to
• "Supported Paper" (P. 57)

The print cartridge or fuser unit is damaged or deteriorated. The print cartridge or fuser 

unit may need replacement depending on its condition. Contact your Customer Support 

Center or your dealer.

Is the toner save feature enabled?

On the [Detailed Settings] tab on your print driver, clear the [Draft Mode] check box.

Refer to
• Online help for the print driver

Change the print density settings under the [Graphics] tab > [Image Settings] on your 

print driver and try printing again. 

Refer to
• Online help for the print driver

Change the [Paper Type] setting and try printing again. For example, if [Paper Type] is 

set to [Heavyweight 1], try changing it to [Heavyweight 2].

Equally spaced smears appear 
on output.

The paper path may not be clean. Print a couple of blank sheets  to remove dirt from the 

paper path.

The interior of the printer may not be clean. Clean the interior of the printer.

Refer to
• " Cleaning the Rib Plate" (P. 169)

The print cartridge or fuser unit is damaged or deteriorated. The print cartridge or fuser 

unit may need replacement depending on its condition. Contact your Customer Support 

Center or your dealer.