Manualsbrain.com
  1. Manuals
  2. Brands
  3. Xerox
  4. Phaser 5335
  5. User Guide

Xerox Phaser 5335 User Guide

Download
Page of 230
6.6 Error Messages and Error Codes
131
Open Tray 2 & 3
Clear Jam
 
then
Open & Close A
A paper jam occurred in the printer.
Pull out Tray 2 and Tray 3 to identify the jammed area, and clear the jammed paper. 
Then, open and close the front cover. Open the front cover even when there is no 
jammed paper inside the cover. The error will not clear unless you open and close 
the front cover.
Open Tray 4, 3
& 2. Clear Jam
 
then
Open & Close A
A paper jam occurred in the printer.
Pull out Tray 2, Tray 3, and Tray 4 to identify the jammed area, and clear the jammed 
paper. Then, open and close the front cover. Open the front cover even when there is 
no jammed paper inside the cover. The error will not clear unless you open and close 
the front cover.
Out of memory
 
Press SET
and Cancel JOB
The job cannot be printed due to insufficient memory.
Cancel the job by pressing the
 
 <OK/Eject> button on the control panel.
Reduce the number of files to print and try printing again. If the same message keeps 
appearing, we suggest you to install additional memory.
PDL Error
 
Press SET
and Cancel JOB
An error occurred while processing the job.
Cancel the job by pressing the
 
 <OK/Eject> button on the control panel.
Check if there is any problem with the print data.
Push in
all trays
The job requested a paper tray, but one of the trays above it is open.
Close the open tray.
Push in Tray N
(N: tray 2 - 5)
The tray N is open.
Push the tray firmly into the printer.
Push in trays
One of the trays is open when printing.
Push the tray firmly into the printer.
Ready to print
Maintenance Kit
 
Ready to print
Replace soon
The maintenance kit (regular replacement part) needs to be replaced soon. Have a 
new maintenance kit ready.
Ready to print
Toner Cartridge
 
Ready to print
Replace soon
The print cartridge needs to be replaced soon. Have a new cartridge ready.
Reboot printer
(***-***)
There is a printer fault.
Switch the power off, wait for the display to go out, and switch the power back on 
again. If the same error code is displayed, copy down the error code (***-***), and 
Contact your Customer Support Center or your dealer. 
Replace
Toner Cartridge
The print cartridge has run out of toner.
Replace the print cartridge.
Set Tray N
xx xx xxxx
(N: tray 2- 5)
The size of the paper loaded in the tray N does not match the paper size requested 
by the job.
Load the paper indicated in the message (xx xx xxxx) in the tray N.
Message
Symptom/Cause/Remedy