Xerox Phaser 4622 Administrator's Guide
Printer Drivers
Phaser 4622
System Administrator Guide
System Administrator Guide
58
h.
Verify that the test page is printed at the machine.
Note
Windows Vista or later:
a.
Click on Installable Options.
b.
If Bi-Directional setup has not been enabled, then select the options that are installed on the
machine.
machine.
c.
Click on the OK button.
d.
Click on Printing Preferences.
e.
Change any default printer settings, as required.
f.
Click on the OK button.
g.
Verify that the test page is printed at the machine.
Manual Printer Driver Configuration
To configure the printer driver without using Bi-Directional communication:
1.
Follow the steps below that are specific to your operating system:
Windows Vista or later
a.
Right-click on the printer in the Printers list and select Properties.
Windows 2003
a.
From the Start menu, click on Settings then Printers.
b.
Right-click on the printer icon and select Properties.
Windows XP
a.
From the Start menu, click on Printers and Faxes.
Note
If you cannot see Printers and Faxes in the Start menu, then click on Start, followed by
Control Panel.
b.
Right-click on the printer icon and select Properties.
2.
Click on the Configuration tab.
3.
Click on Installable Options.
4.
Select the options that are installed on the machine.
5.
Click on the OK button.
6.
Click on the General tab.
7.
Click on Print Test Page.
8.
Click on the OK button to close the Test Page window.
9.
Click on Printing Preferences.
10. Change any default printer settings, as required.
11. Verify that the test page is printed at the machine.