Xerox Phaser 5400 Installation Guide

Windows 95/98/Me Network

Quick install steps

1.

Insert your printer’s CD-ROM into your computer’s CD-ROM 
drive. If your PC is set to autorun, a CD Navigator Utility should 

automatically start. If it does not start, then:

a.

Click Start and Run.

b.

In the Run window, type: <CD drive>:\SETUP32.EXE. 

2.

Select your desired language from the available list.

Printer driver installation

1.

Install the printer drivers for your printer. Within CD Navigator, 

select Printer Drivers, and then select Install Xerox Phaser 5400 

Laser Printer Drivers.

The Xerox TCP/IP Port Monitor has not been installed yet. It 

is necessary to temporarily install the printer drivers to an 
alternate port. A local port, such as LPT1, is recommended.

2.

Run the TCP/IP Port Monitor Setup program located on your 
printer’s CD-ROM: 

a.

Click Start and Run.

b.

In the Run window, type: <CD drive>:\instal\utility\Tcp Ip 

Port Monitor\Windows 9x\<language>\setup.exe.

3.

On the first dialog box, select Install/Upgrade Port Monitor and 
click OK.

Port monitor installation

1.

The installation process automatically copies the files to the 
system directory. When this process is completed, a dialog box 

appears that reads: The Xerox TCP/IP Port Monitor was 

2.

Click OK.