Xerox Phaser 540 Leaflet

Page of 2
 
Paper or Transparency
 
If you specify a particular media type, the printer picks media from any tray 
loaded with that type.  If the type requested is not available, the printer 
waits until it is available, and displays a message requesting the appropriate 
type of media be loaded.
 
AutoSelect
 
You can also choose 
 
AutoSelect
 
 from the front panel or with a utility file.  
With 
 
AutoSelect
 
, the printer picks media from the default tray (if it is filled 
and loaded) or any tray in the printer that has media loaded.  When that 
tray is empty, the printer automatically picks from another tray if it is the 
same type of media tray.
 
Manual Feed
 
The printer driver and the front panel also allow you to choose the manual 
feed tray.  In the front panel, the selections are 
 
Manual Feed: Paper
 
 and 
 
Manual Feed: Transparency
 
.  In the Macintosh driver, you select 
manual feed and media type separately.  If no media is loaded in the manual 
feed tray when manual feed is selected, the printer waits 60 seconds before 
it picks media from a tray (the default timeout is 60 seconds).  
 
Note
 
You can change the printer’s tray-switching behavior by sending 
the appropriate utility file to the printer; however, media tray 
selections made in the driver take priority over selections made in 
either the front panel or by sending utility files to the printer. 
 
Source: 070-8602-00 C3