Xerox Phaser 780 Tabloid Installation Guide
PhaserShare Networking Manual
57
TCP/IP Printer Configuration (All Platforms)
7
General information on setting IP parameters (front panel)
You can set IP address, network mask, gateway address, and broadcast address from
the front panel. See the following topics for procedures for each of the following
printers:
the front panel. See the following topics for procedures for each of the following
printers:
■
■
■
■
Printer defaults for network mask and broadcast address
When you set the IP address from the front panel, the printer supplies default values
for network mask and broadcast address. These default values are calculated
according the first octet of the IP address you set. The following table provides some
examples.
for network mask and broadcast address. These default values are calculated
according the first octet of the IP address you set. The following table provides some
examples.
When you are setting the IP addressing parameters from the front panel, you can
accept these default values or change them. However, if you return to the front
panel later to change the IP address, the network mask and broadcast address are
reset to these default values, and you will have to set them as well if you want values
different than these defaults.
accept these default values or change them. However, if you return to the front
panel later to change the IP address, the network mask and broadcast address are
reset to these default values, and you will have to set them as well if you want values
different than these defaults.
N
O
T
E
If you are attempting to perform any front panel procedure and you don’t see the
expected menu choices, the front panel may be locked. For information on how to
unlock it, see “If the front panel is locked” on page 167.
expected menu choices, the front panel may be locked. For information on how to
unlock it, see “If the front panel is locked” on page 167.
Setting IP parameters: Phaser 840 printer front panel
1.
When the front panel displays
READY TO PRINT
, press the down arrow
button until
Menu
is highlighted. Press Select.
2.
Press the down arrow button until
Printer Configuration
is
highlighted. Press Select.
3.
Press the down arrow button until
Network Settings
is highlighted.
Press Select.
4.
Press the down arrow button until
TCP/IP
is highlighted. Press Select.
1st octet of
IP address
IP address
Example
IP address
IP address
Printer’s default
network mask
network mask
Printer’s default
broadcast address
broadcast address
1 - 127
118.101.14.101
255.0.0.0
118.255.255.255
128 - 191
134.101.14.101
255.255.0.0
134.101.255.255
192 - 223
192.101.14.101
255.255.255.0
192.101.14.255