Xerox XDPE/400 (also known as EOMS I-Services) Support & Software User Guide
Installation requirements
Installing and Customizing XDPE/400 (9/2001)
4-12
Migration issues
If you do not currently have any version of XDPE/400 installed on your
AS/400, skip to chapter 5, “
Displaying your XDPE/400 library and folder information
You can display the software information for your current XDPE/400
library and folder. Enter DSPXDPEVER and press ENTER to:
•
•
Display the name, release level, and maintenance (PTF) level of
your XDPE/400 library and folder
•
Display the format (A4 or LETTER) and ID number of your
XDPE/400 folder
For users running XDPE/400 2.1.0 or later, if you need to obtain this
information on a specific XDPE/400 library, press F4 instead of ENTER.
The system prompts you to type in the library name of your choice.
Recording your current global values
If you currently have any version of XDPE/400 installed on your AS/400,
it is imperative that you perform these steps to record your current global
values; they will not be reflected in the version of XDPE/400 you are
installing.
Step 1.
Enter WRKGBLVAL to display the Work With Global Values screen.
Step 2.
Record your current values for the parameters on the first screen, either
by using the PRINT SCREEN key on your keyboard to print an image of
each screen, or by writing them down.
Step 3.
Page forward to display the next screen of global values. Record the
values as you did for the first screen.
Step 4.
Repeat steps 2 and 3 until you have recorded the parameters for all 5 of
the Work With Global Values screens.