Xerox DocuTech 6100 Production Publisher User Guide

 
DT6180 HandyBook                                                                                                                   80 

 

16.  Look 76 mm (3 inches) directly above the sensor for orange and white wires. These wires are 

attached to the detector which faces straight down.  

17.  Brush a folded sheet of paper across the Sensor.  

 

 

18.  Close the Finisher Front Doors. If present, lower the bypass transport. Close the Finisher Top 

Cover. 

 

 
Clean both the Q1010 and Q1009 Sensor, beginning with the Q1010 Sensor.  
 
WARNING: The surrounding area of the machine around the sensors can be extremely hot!  
 
Cleaning the Q1010 Sensor:  

1.  Open the Processor Doors. The handle to open the doors is above Paper Tray 1.  
2.  Behind the left Processor Door, just to the left of Paper Tray 1, is a large green handle. Pull on the 

handle and pull out the Fuser Module.  
 

 

3.  Locate the CAUTION label on top of the Fuser Module.  
4.  Approximately 25 mm (1 inch) to the left of the label is a small U-shaped cutout in the aluminum 

frame and a tiny square mirror the size of your small fingernail.