Xerox SmartSend Support & Software Installation Guide
2-24
Prepare for Installation
Installing a Printer Driver for a Remote Printer Destination
To install a printer driver for a Remote Printer destination:
1
Make sure you are logged on to the SMARTsend computer as a user with administrative privileges. The
network user account should be on the local network on which network printer is connected.
network user account should be on the local network on which network printer is connected.
2
Open the Windows Add Printer wizard. Click Next.
3
Select Local printer attached to this computer, then click Next.
4
The Select a Printer Port dialog appears. Select the Create a new port, and then choose Standard
TCP/IP Port as the port type. Click Next.
TCP/IP Port as the port type. Click Next.
5
The Add Standard TCP/IP Printer Port Wizard appears. Click Next.
6
Enter the Printer Name or IP address. The Port Name will be filled in automatically (do not change
this name). Click Next.
this name). Click Next.
7
If necessary, select or enter Additional Port information, then click Next.
8
Click Finish to close the Add Standard TCP/IP Printer Port Wizard.
9
In the Add Printer Wizard, select a printer manufacturer and corresponding printer model from the list,
or click Have Disk... to locate the driver you would like to install. Click Next.
or click Have Disk... to locate the driver you would like to install. Click Next.
10
Enter or confirm the Printer Name, and select a Default Printer option. Click Next.
11
In the Printer Sharing dialog, select Share Name and enter the name for the printer. Click Next.
12
Enter a location and comment, if needed. Click Next.
13
Print a test page, if needed. Click Next.
14
Click Finish to complete driver installation.