Xerox SmartSend Support & Software User Guide

Prepare for Installation

SMARTsend

Installation and Administration Guide

27

of the default IIS installation; it must be selected during the initial installation procedure or added 
to the installation afterwards. 

Configure the Internet Information Services on a Windows Vista system by enabling IIS 6.0 
compatibility and performing the following steps:
1.

Open the Internet Information Services Manager (Start > Control Panel > Programs and 
Features).

2.

Select Turn Window Features On or Off.  The Window Features window displays.

3.

Expand Internet Information Services and expand Web Management Tools.

4.

Select all of the checkboxes below the Web Management Tool.

5.

Click OK.

Devices that support FTP as a transfer protocol interpret FTP file path information according to UNIX 
conventions. The directory listing style of the Internet Information Services FTP Server must be 
configured to use UNIX style listings. 

To change the FTP Home Directory style to UNIX and check 
read/write permissions:
1.

Open the Internet Information Services Manager (Start > Programs > Administrative Tools > 
Internet Services Manager) and expand IIS in the tree view.

2.

Right-click Default FTP Site and select Properties.

3.

Select the Home Directory tab and select UNIX as the Directory Listing Style.

4.

Confirm that both Read and Write are checked.

5.

Click OK on all screens.

SMARTsend requires proper configuration of the Internet Information Services (IIS) authentication 
options. These options should be configured and confirmed before the SMARTsend application is 
installed. 

Note: 

FTP support is required if the devices to be used with SMARTsend do not support SMB, 

HTTP, or HTTPS, or in cases where the use of these additional protocols is restricted on your 
network. In addition, if FTP is installed after SMARTsend is installed, please refer to the topic 

on page 158 for additional configuration 

instructions.