Xerox Document Centre ColorSeries 50 Installation Guide
T
HE
D
OCUMENT
C
OMPANY
XEROX
Xerox Document Centre ColorSeries 50 LP/ST Microsoft
®
(SMB) Quick Install
9.
Click Apply New Settings if any changes were
made. Provide a User Name and Password
when prompted. The default User Name is
Admin with a capital “A” and the default
password is 11111.
made. Provide a User Name and Password
when prompted. The default User Name is
Admin with a capital “A” and the default
password is 11111.
10.
Power off and power on the printer. Allow at
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print.
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print.
11.
Continue with
Step 3 Print a Test Page.
Step 3 Print a Test Page
1.
Install the network printer driver(s) for your
workstation environment, and print a test page.
Detailed instructions for installing printer
drivers, printing a test page, and other printing
options are provided in the
workstation environment, and print a test page.
Detailed instructions for installing printer
drivers, printing a test page, and other printing
options are provided in the
Xerox Document
Centre ColorSeries 50 LP/ST Printer User
Guide.
Guide.
2.
If you have configured your printer for printing
with lpr/lpd, use a native print tool to send a
test page to the Document Centre ColorSeries
50 LP/ST.
with lpr/lpd, use a native print tool to send a
test page to the Document Centre ColorSeries
50 LP/ST.
3.
Additional information on installing the printer
with a Microsoft (SMB) Network is in the
with a Microsoft (SMB) Network is in the
Xerox
Document Centre ColorSeries 50 LP/ST
Printer Installation Guide.
Printer Installation Guide.
Step 2 Customize Printer Connectivity
Settings
Settings
If you use CentreWare Internet Services:
1.
At your workstation, open the Internet Explorer
or NetScape navigator browser.
or NetScape navigator browser.
2.
In the browser, enter the IP Address for the
printer and press the Enter key. The Internet
Services Home Page is displayed.
printer and press the Enter key. The Internet
Services Home Page is displayed.
3.
Click on the Properties button.
4.
Click Connectivity, Protocols, and SMB to
view Microsoft (SMB) information.
view Microsoft (SMB) information.
5.
Be sure to enter the Workgroup/Domain
name and the SMB Name. Review and edit
any additional fields, as needed.
name and the SMB Name. Review and edit
any additional fields, as needed.
6.
If you are using IP, continue with Step 7. If you
are not using IP, skip to Step 9.
are not using IP, skip to Step 9.
7.
Click Connectivity + Protocols + TCP/IP in
the Properties tab menu to view current TCP/IP
information.
the Properties tab menu to view current TCP/IP
information.
8.
Make sure that the IP Address, Host Name,
Subnet Mask, and Gateway Address are set
to the correct values.
Subnet Mask, and Gateway Address are set
to the correct values.
8.
If you are using IP, continue with Step 9. If you
are not using IP, skip to Step 11.
are not using IP, skip to Step 11.
9.
Click on the TCP/IP tab.
10.
Review and edit any fields, if necessary. If you
enable DHCP, be sure to save the new
Configuration Report that will print
approximately 5 minutes after you power off
and power on the printer since the IP Address
may have changed. You will need the new
address the next time you access the settings.
enable DHCP, be sure to save the new
Configuration Report that will print
approximately 5 minutes after you power off
and power on the printer since the IP Address
may have changed. You will need the new
address the next time you access the settings.
11.
When you have finished entering the Settings
data, click Apply, OK and then Exit.
data, click Apply, OK and then Exit.
12.
Power off and power on the printer. Allow at
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print in approximately 5 minutes. The
information on the Configuration Report can be
very helpful in completing the network
installation and troubleshooting problems with
your printer.
least 30 seconds between powering off and
powering on the printer. A Configuration Report
will print in approximately 5 minutes. The
information on the Configuration Report can be
very helpful in completing the network
installation and troubleshooting problems with
your printer.
13.
Continue with
Step 3 Print a Test Page.
©1999 Xerox Corporation
701P30988 6-99
701P30988 6-99
For assistance, contact your local Xerox Customer Support Center: USA: 1-800-821-2797 Canada: 1-800-939-3769
Bustled Controller, Part Numbers 97N00893 and 97N00894 are for use with Xerox Corp. Digital Color Product Model YFA-1.