Xerox FlowPort Support & Software Installation Guide
Upgrading from a Licensed Version of FlowPort 2.1.1 SP1 to 2.1.1 SP2
Chapter 1: Installing FlowPort Server 2.1.1 SP2
1–37
Upgrading from a Licensed Version of FlowPort 2.1.1
SP1 to 2.1.1 SP2
SP1 to 2.1.1 SP2
Follow the steps in this section to install FlowPort server software
on a server that has an existing FlowPort 2.1.1 SP1 installation.
on a server that has an existing FlowPort 2.1.1 SP1 installation.
The following procedure shows the Windows 2000 server
installation only. If you are installing the FlowPort Server software
on a Windows NT4.0 server, note that there are minor differences in
the installation, and you may have to reboot the server during the
installation. Use this Windows 2000 installation as a guide.
installation only. If you are installing the FlowPort Server software
on a Windows NT4.0 server, note that there are minor differences in
the installation, and you may have to reboot the server during the
installation. Use this Windows 2000 installation as a guide.
To install FlowPort 2.1.1 SP2 on a Windows 2000 server that has an
existing FlowPort 2.1.1 SP1 installation:
existing FlowPort 2.1.1 SP1 installation:
1
Insert the FlowPort CD into the CD-ROM drive.
2
If the FlowPort installation program does not run automatically:
A
Double-click to open My Computer.
B
Click the CD-ROM drive.
C
Click setup.exe.
3
Select “Install FlowPort on this server” for English, “Installer
FlowPort sur ce serveur” for French
FlowPort sur ce serveur” for French
01isgtit.book Page 37 Saturday, March 2, 2002 5:28 PM