Xerox DigiPath Professional Production Software Support & Software Administrator's Guide
D
IGI
P
ATH
4.0 W
EB
S
ERVICES
S
ERVER
A
DMINISTRATOR
G
UIDE
IX
Safety
Your Xerox equipment and supplies were designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.
Attention to the following notes ensures the continued safe
operation of your equipment.
operation of your equipment.
If you need any additional safety information concerning the
equipment or materials, contact your local representative.
equipment or materials, contact your local representative.
Operational safety
Always connect the equipment to a properly grounded power
source receptacle. If in doubt, have the receptacle checked by a
qualified electrician.
source receptacle. If in doubt, have the receptacle checked by a
qualified electrician.
WARNING
Improper connection of the equipment grounding conductor
can result in electrical shock.
can result in electrical shock.
Always follow all warnings and instructions marked on, or
supplied with, the equipment.
supplied with, the equipment.
Always locate the equipment on a solid support surface (not on
a thick pile carpet) with adequate strength for the weight of the
machine.
a thick pile carpet) with adequate strength for the weight of the
machine.
Always exercise care in moving or relocating the equipment.
Always place the equipment in an area which provides adequate
room area for ventilation and servicing.
room area for ventilation and servicing.
Always use the materials and supplies specifically designed for
your Xerox equipment. Use of unsuitable materials may result in
poor performance and possibly, a hazardous situation.
your Xerox equipment. Use of unsuitable materials may result in
poor performance and possibly, a hazardous situation.
Never use a ground adaptor plug to connect the equipment to a
power source receptacle that lacks a ground connection
terminal.
power source receptacle that lacks a ground connection
terminal.
D