Xerox DigiPath Professional Production Software Support & Software Administrator's Guide
S
YSTEM
A
DMINISTRATOR
G
UIDE
C-1
C.
Configuring the Adaptec SCSI
adapters
adapters
This appendix contains the procedure for configuring the
Adaptec SCSI adapters.
Adaptec SCSI adapters.
The Adaptec SCSI adapters have their own configuration utility
called SCSISelect that is loaded on the DigiPath system during
installation. This utility allows you to view or change the Adaptec
SCSI adapter settings without opening the computer or handling
the adapter.
called SCSISelect that is loaded on the DigiPath system during
installation. This utility allows you to view or change the Adaptec
SCSI adapter settings without opening the computer or handling
the adapter.
CAUTION
During installation, the SCSI adapters are configured to work
properly with your DigiPath Production Software system
components. It is recommended that you do not change the
configuration settings unless instructed to do so by a Xerox
service or customer support representative.
properly with your DigiPath Production Software system
components. It is recommended that you do not change the
configuration settings unless instructed to do so by a Xerox
service or customer support representative.
To start the SCSISelect utility, press <Ctrl>+<A> when prompted
during the boot process. If you have more than one SCSI device
connected, you must select the desired device when the
software prompts you. The first menu displayed provides you
with two main options: Configure/View Host Adapter Settings
and SCSI Disk Utilities. When you are finished using the utility,
you can exit SCSISelect by pressing <Esc> until a message
prompts you to exit.
during the boot process. If you have more than one SCSI device
connected, you must select the desired device when the
software prompts you. The first menu displayed provides you
with two main options: Configure/View Host Adapter Settings
and SCSI Disk Utilities. When you are finished using the utility,
you can exit SCSISelect by pressing <Esc> until a message
prompts you to exit.
For more information regarding the options available in the
SCSISelect utility and how to use them, refer to the Adaptec
AHA-2940Ultra / 2940Ultra Wide PCI-to-UltraSCSI Host Adapter
with SCSISelect User’s Guide.
SCSISelect utility and how to use them, refer to the Adaptec
AHA-2940Ultra / 2940Ultra Wide PCI-to-UltraSCSI Host Adapter
with SCSISelect User’s Guide.
B