Xerox DigiPath Professional Production Software Support & Software Administrator's Guide
W
INDOWS
2000
AND
NETWORK
CONFIGURATIONS
X
EROX
D
IGI
P
ATH
P
RODUCTION
S
OFTWARE
3-8
S
YSTEM
A
DMINISTRATOR
G
UIDE
Updating the Emergency Repair Disk
3
When DigiPath Production Software is installed, the Emergency
Repair Disk is updated to reflect the most recent configuration.
You may need to occasionally update the Emergency Repair
Disk if you make changes to the DigiPath workstation
configuration, such as the following:
Repair Disk is updated to reflect the most recent configuration.
You may need to occasionally update the Emergency Repair
Disk if you make changes to the DigiPath workstation
configuration, such as the following:
•
Add, delete, or change user accounts and user information or
configuration
configuration
•
Install new software or hardware
•
Change or remove network drive mappings
To update the Emergency Repair Disk for a DigiPath
workstation:
workstation:
1. Locate the Emergency Repair Disk for the workstation and
have it ready for use.
2. Select [Start: Programs: Accessories: System Tools: Backup]
from the Windows desktop. The Backup utility opens.
3. Select the [Emergency Repair Disk] button on the Welcome
tab. The Emergency Repair Diskette dialog box opens.
4. Insert the Emergency Repair Disk into the floppy drive and
select [OK].
The Emergency Repair Disk is reformatted and then updated
with the new repair information. This process may take
several minutes.
with the new repair information. This process may take
several minutes.
5. Select [OK] at the message informing you that the
Emergency Repair Disk was saved successfully.
6. Remove the Emergency Repair Disk from the floppy drive
and place it in a secure storage area.
7. Select [File: Exit] to close the Backup utility.
A