Xerox DocuColor 12 Printer with Matchprint Professional Server Installation Guide

2003 Kodak Polychrome Graphics. All rights reserved. 

The contents of each tray can vary from site to site, however standard tray setup is as follows: 

Tray 1: Media Type - Normal Bond, Media Size - Letter (8.5 x 11 inches) 

Tray 2: Media Type - Normal Bond, Media Size - Letter SEF (11 x 8.5 inches) 

Tray 3: Media Type - Normal Bond, Media Size - Legal (8.5 x 14 inches) 

Tray 4: Media Type - Normal Bond, Media Size - Tabloid (11 x 17 inches) 

Tray 6 (High Capacity Feeder) – Optional: Media Type - Normal Bond, Media Size - Letter (8.5 
x 11 inches) 

Notes:  

•  Tray 5 is a manual feed tray located on the left side of the Xerox DocuColor 12. (Tray 5 

is not configured here.) 

•  Load Kodak Polychrome Graphics/Xerox Color Laser Proofing Paper so the watermark 

wording is face down in the tray. 

•  The DocuColor 12 can be set to disable automatic tray switching, however the 

Matchprint Professional Server overrides this setting if the job's parameters are set to 
Automatically Select the input tray. Go to the Setting Job Parameters, Printer tab in 
the online help or the user guide.pdf for more information. 

4.  If calibration is required, go to Printer Calibration.