Xerox ColorQube 9201/9202/9203 Administrator's Guide

Network Installation

Xerox ColorQube™ 9201/9202/9203
System Administrator Guide

98

13. Click the [Reboot Machine] button and click [OK] to reboot the machine. The network controller 

takes approximately 5 minutes to reboot and network connectivity will be unavailable during this 
time.

Create a device description from your AS400 terminal's command line. 

1.

Select the F-4 key to prompt the CRTDEVPRT command. Enter the following parameters:

Device Description: Xeroxprinter 

Device Class: *lan 

Device Type: 3812 

Device Model: 1 

2.

Press [Enter] to continue, and enter the following parameters: 

Lan Attachment: *IP 

Port Number: 9100 

Online at IPL: *yes 

Font Identifier: 11 

Form Feed *autocut 

Note:

For some versions of AS400, the default may match some of these parameters. 

3.

Leave all other parameters at the default value, press [Enter], and enter the following parameters: 
Activation Timer: 170 

Inactivity Timer: *sec15 

Host Print Transform: *yes 

4.

Press [Enter] to continue, and enter the following parameter: Manufacturer Type and Model: 
*hp5si 

5.

Leave the remaining parameters set to their default values and press [Enter] to continue. Enter 
the following parameters: Remote Location: Enter the IP address of the printer. 

User defined options: *IBMSHRCNN 

System driver program: *IBMSNMPDRV 

6.

Leave all other options set to the default values. Press [Enter], A message will indicates that you 
have created the device Xerox printer. 

7.

Power on the device and start a print writer. Then place a spool file in the appropriate queue to 
test the printer. 

1.

At the command line, issue CRTOUTQ and press F4, then F9 for additional parameters. The setup 
is as follows: 

Note:

ONLY CHANGE THE PARAMETERS IN BOLD.

•

Output queue: queue name 

•

Library: Library name 

•

Maximum spooled file size