Xerox ColorQube 9201/9202/9203 Administrator's Guide

Page of 336
Print Drivers
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
109
7.
Check the checkbox to select [Print Services for UNIX].
8.
Click [OK].
9.
Click [Next].
10. Close the [Add/Remove Programs] window.
Add the Printer
1.
From the [Start] menu, select [Settings] and then [Printers]/[Printers and Faxes].
2.
Double-click [Add Printer] and click on [Next].
3.
Select [Local Printer] (Windows 2000) or [Local Printer attached to this computer] (Windows 
2003) and deselect [Automatically detect and install my Plug and Play printer].
4.
Click [Next].
5.
Select [Create a New Port].
6.
Select [LPR Port] from the Type drop-down menu and click [Next].
Note:
The LPR Port is only available when Print Services for UNIX is installed.
7.
Enter the IP Address of the printer.
8.
Enter the printer name.
9.
Click [OK].
10. You will be prompted for a print driver. Select [Have Disk] and click [Browse]. Locate the Drivers 
folder on the CD.
11. Select the required driver.
12. Click [Open] and then [OK].
13. Select the model of your machine from the list. Click [Next].
14. The Name your Printer screen appears. Enter a printer name and click [Next].
15. The Printer Sharing Screen appears. If you will be sharing this printer with other clients select 
[Share As] (Windows 2000) or [Share Name] (Windows 2003) and enter a share name. Click 
[Next].
16. Enter a details in the [Location] and [Comment] if required. Click [Next].
17. Select [Yes] to print a test page. Click [Next].
18. Click [Finish]. The print driver will install.
Configure the Print Driver
1.
From the [Start] menu, select [Settings] and then [Printers]/[Printers and Faxes].
2.
Right click on the printer icon and select [Properties].
3.
Click on the [Advance] tab, then click on [Printing Defaults].
4.
Select the settings you wish to set for the printer.
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide 
for Windows CD.