Xerox ColorQube 9201/9202/9203 Administrator's Guide
Security
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
157
c.
For the [IP Address] field, enter the Specific or Subnet address range. For a Subnet range,
enter the lowest IP Address in the fields provided, then the final IP lower octet (for IPv4) or
range (for IPv6) in the final field.
enter the lowest IP Address in the fields provided, then the final IP lower octet (for IPv4) or
range (for IPv6) in the final field.
d.
Click on the [Add] button, to add the address range to the host group.
6.
Click on the [Save] button, then click on the [OK] button when you see the message “Properties
have been successfully modified” to save changes and return to the IP Sec page.
have been successfully modified” to save changes and return to the IP Sec page.
Protocol Groups
This option displays all the Protocol Groups saved and the details of each Protocol Group.
1.
From the IP Sec page, click on the [Protocol Groups] tab under IPsec heading.
2.
Protocol Groups can be deleted by highlighting a Protocol Group in the IP Protocol Group area
and clicking on the [Delete] button, if the Protocol Group selected is not being used by a security
policy, then click on the [OK] button.
and clicking on the [Delete] button, if the Protocol Group selected is not being used by a security
policy, then click on the [OK] button.
3.
To add or edit a Protocol Group in the IP Protocol Group area click on either the [Add New
Protocol Group] button or highlight a Protocol Group and click on the [Edit] button.
Protocol Group] button or highlight a Protocol Group and click on the [Edit] button.
Note:
If you change the name of a Protocol Group that is being used in Security policy, then the
updated protocol group name will also be reflected in the security policy entry.
a.
In the IP Protocol Group Details area, enter the name of the protocol group in the [Group
Name] field.
Name] field.
b.
Enter description for this protocol group in the [Description] field.
c.
Check the required services checkboxes for this protocol group under [Service Name].
4.
In the Custom Protocol area:
a.
check the corresponding checkboxes to select or deselect a custom protocol, enter details in
the [Service Name] field.
the [Service Name] field.
b.
From the [Protocol] drop-down menu select the protocol type.
c.
Enter the port number in the [Port] field.
d.
From the [Device is] drop-down menu, select either [Server] or [Client].
Note:
The Service Name, Protocol Type, Port Number and Device is fields for a Custom Protocol
will be disabled when its associated checkbox is unchecked.
5.
Click on the [Save] button to return to the IP Sec page.
Actions
This option displays the list of actions associated with the IPsec security policies. You can view and
manage IP actions that can be used in the security policies.
manage IP actions that can be used in the security policies.
1.
From the IP Sec page, click on the [Actions] tab under IPsec heading.
2.
To delete an Action, highlight an Action in the IP Actions area and click on the [Delete] button, if
the Action selected is not being used by a security policy, then click on the [OK] button.
the Action selected is not being used by a security policy, then click on the [OK] button.