Xerox ColorQube 9201/9202/9203 Administrator's Guide
Workflow Scanning
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
System Administrator Guide
184
9.
In the Server Information area:
a.
For Protocol, select from the drop-down menu, the communication protocol for the
Validation Server.
Validation Server.
b.
Select the method you want to use to specify the Validation Server, select either [IPv4
Address], [IPv6 Address] or [Host Name].
Address], [IPv6 Address] or [Host Name].
c.
Enter the IP Address or Hostname of the Validation Server and the port number.
Note:
The default port number is 80 if you select HTTP for Protocol or 443 if you selected HTTPS
for Protocol.
d.
In the [Path] field, enter the path on the server.
Note:
The format for a directory path for FTP is /directory/directory, while the format for a
directory path for SMB is \directory\directory.
e.
Specify the time in seconds after which the server will time out in the [Response Timeout]
field. The range is from 5 to 100. The default is 8.
field. The range is from 5 to 100. The default is 8.
f.
Click on the [Apply] button to save settings and return to the Validation Server screen.
10. To Delete a Validation Server from the list:
a.
Highlight the Validation Server and click on the [Delete] button.
b.
Click on the [OK] button when you see the confirmation message ‘Are you sure you want to
delete the selected validation server?’.
delete the selected validation server?’.
Scanning Web Service
Use this page to examine the status of services required for Scanning Web Services.
The following services must be enabled and/or configured for Scanning Web Services to be available:
•
HTTP (SSL)
•
Scan Template Management
•
Scan Extension
At your Workstation:
1.
Open the web browser and enter the IP address or location of the device in the Address bar, and
press [Enter].
press [Enter].
2.
Click the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.
Click on the [Login] button.
5.
Click on the [Services] link.
6.
Click on the [Workflow Scanning] link.
7.
Select [Scanning Web Services] in the directory tree.
8.
In the Setup (Required) area, the following services will display the status of configuration:
•
HTTP (SSL) - displays the status of the HTTP (SSL) server. Click on the [Settings] button to
review or change the HTTP Protocol Settings. For information on HTTP protocol settings, refer
to the
review or change the HTTP Protocol Settings. For information on HTTP protocol settings, refer
to the
•
Scan Template Management - displays the status of the Scan Template Management
service. Click on the [Settings] button to enable or disable this HTTP Web Service.
service. Click on the [Settings] button to enable or disable this HTTP Web Service.