Xerox ColorQube 9201/9202/9203 Administrator's Guide
General Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
System Administrator Guide
24
c.
By default all features are selected, click on the [Clear All] button, and check the following
feature checkboxes to select the features that you wish to clone:
feature checkboxes to select the features that you wish to clone:
d.
To select all the features, click on the [Select All] button.
e.
Click on the [View feature Details] link to view the specific parameters that can be cloned for
any of the feature.
any of the feature.
f.
Click on the [Clone] button.
8.
In the Cloning Instructions area:
a.
Right-click on the [“Cloning.dlm”] link that appears and select [Save Target As].
b.
A dialog box will prompt you to specify a name and location for the cloned file. Ensure the
extension reads ‘.dlm’.
extension reads ‘.dlm’.
c.
Click on the [Save] button. The ‘.dlm’ file can now be used to clone other devices.
To Install the Clone File on Another Device
Note:
This procedure will cause the device to reboot and will be unavailable over the network for
several minutes.
1.
Click on the [Status] tab.
2.
Select [Welcome] in the directory tree.
3.
Click on the [I Have A Cloning File] button.
4.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
5.
Click on the [Login] button.
6.
In the Install Clone File area, click on the [Browse] button.
7.
Locate your file and click on the [Open] button
8.
Click on the [Install] button.
The device will be unavailable over the network for several minutes. Once rebooted a Configuration
Report will print, if enabled.
Report will print, if enabled.
• Accounting
• Security
• Administration
• SMart eSolution
• Audit Log
• System Disk
• Authentication & Authorization
Configuration
• Power Saver
• Connectivity Settings
• Print Settings
• E-mail
• Workflow Scanning
• Fax
• Templates
• Internet Fax
• Device Upgrade
• Internationalization
• Web Services
• Job Management
• Public Address Book