Xerox ColorQube 9201/9202/9203 Administrator's Guide
General Setup
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
47
Online / Offline
The Online/Offline window allows the System Administrator to stop and resume the system from
receiving or sending jobs over the network.
receiving or sending jobs over the network.
At the Device:
1.
Press the <Log In/Out> button to enter the Tools pathway.
2.
Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
[Enter].
3.
Press the <Machine Status> button.
4.
Touch the [Tools] tab.
5.
Touch [Network Settings].
6.
Touch [Online/Offline].
7.
To stop the device receiving or sending jobs over the network touch the [Offline] button. Any
installed optional features using the network (for example Workflow Scanning) will not be
available until the device is set to Online.
installed optional features using the network (for example Workflow Scanning) will not be
available until the device is set to Online.
Note:
To enable the device to receive or send jobs over the network touch the [Online] button.
8.
Touch [Close].
9.
Press the <Log In/Out> button, then touch [Logout] to exit the Tools pathway.
Auxiliary (Foreign Device) Interface Kit
A third party access and accounting device, such as a coin operated device or a card reader can be
attached to the device. To enable this option, the Foreign Device Interface Kit must be installed. After
the kit is installed the administrator must enable Auxiliary Access as the Accounting Mode from the
Tools menu of the device, as follows:
attached to the device. To enable this option, the Foreign Device Interface Kit must be installed. After
the kit is installed the administrator must enable Auxiliary Access as the Accounting Mode from the
Tools menu of the device, as follows:
1.
Press the <Log In/Out> button.
2.
Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch
[Enter].
[Enter].
3.
Press the <Machine Status> button.
4.
Touch the [Tools] tab.
5.
Touch [Accounting Settings].
6.
Touch [Accounting Mode].
7.
Select [Auxiliary Access].
8.
Select the required [Auxiliary Device Configuration] and configure your device and touch [Save].
9.
Touch [Save].
10. Press the <Log In/Out> button, then touch [Logout] to exit the Tools pathway.
For further instructions on Auxiliary (Foreign Device) Interface Setup options refer to the Interactive
User Guide delivered with your device.
User Guide delivered with your device.