Xerox ColorQube 9201/9202/9203 Administrator's Guide
Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
System Administrator Guide
74
You can also enable or disable Authentication Failure Generic Traps on the device. SNMPv3 can be
enabled to create an encrypted channel for secure device management.
enabled to create an encrypted channel for secure device management.
SNMP is a set of protocols designed to help manage complex networks. SNMP compliant devices store
data about themselves in MIBs and return this data to the SNMP requesters. The SNMP Configuration
pages provide control over SNMP security, including methods to configure:
data about themselves in MIBs and return this data to the SNMP requesters. The SNMP Configuration
pages provide control over SNMP security, including methods to configure:
•
Administrative and Key User accounts with privacy and authentication protocols and key
associated with each account.
associated with each account.
•
SNMP user account read or read/write access.
•
An access control list that limits SNMP access to the printer to specific hosts.
To Configure SNMP v1/v2c
1.
At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
bar, and press [Enter].
2.
Click on the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
4.
Click on the [Login] button.
5.
Click on the [Connectivity] link.
6.
Click on the [Protocols] link.
7.
Select [SNMP] in the directory tree.
Note:
For security purposes, Xerox recommends that the administrator changes the SNMP v1/V2c
public/private community strings from their default string names to random string names.
8.
In the SNMP Properties area:
a.
Check to ensure the [Enable SNMP v1/v2c Protocols] checkbox is selected.
b.
Click on the [Edit SNMP v1/v2c Properties] button.
The System Administrator uses the Edit SNMP v1/v2c Properties page to edit the GET, SET,
and TRAP community names for the device.
The System Administrator uses the Edit SNMP v1/v2c Properties page to edit the GET, SET,
and TRAP community names for the device.
c.
In the Community Names area, enter a name in the [GET Community Name] field. The
default is public.
default is public.
d.
Enter a name in the [SET Community Name] field. The default is private.
Note:
Changes made to the GET or SET community names for this device will require
corresponding GET or SET community name changes for each application which uses the SNMP
protocol to communicate with this device (for example, Xerox PrinterMap, Xerox Internet Services,
any 3rd party network management applications).
protocol to communicate with this device (for example, Xerox PrinterMap, Xerox Internet Services,
any 3rd party network management applications).
e.
In the Default Trap Community Name, enter a name in the [TRAP Community Name] field.
The default is SNMP_trap.
The default is SNMP_trap.
Note:
The Default TRAP community name is used to specify the default community name for all
traps generated by this device. The Default TRAP community name can be overridden by the TRAP
community name specified for each individual TRAP destination address. The TRAP community
name for one address may not be the same TRAP community name specified for another address.
community name specified for each individual TRAP destination address. The TRAP community
name for one address may not be the same TRAP community name specified for another address.
f.
Click on the [Save] button to accept the changes and return to the SNMP page.