Xerox ColorQube 9201/9202/9203 User Guide

Scan to Home

ColorQube™ 9201/9202/9203
Workflow Scanning

174

Scan to Home

 allows you to scan hard copy originals at the ColorQube™ 9201/9202/9203 and send 

them to a destination on the network which is specified as your "Home" destination.

You enter your Network Authentication 
log in at the device. The device displays 
one Scan to Home template. When you 
scan a document the authentication 
server provides the information as to who 
is logged in at the device.

The Workflow Scanning option needs to 
be installed before this feature can be 
used but it is NOT necessary for the 
Workflow Scanning

 repositories and 

templates to be configured.

Your System Administrator enables the Scan to Home option in Internet Services. Your System 
Administrator also needs to enable Network Authentication for this feature to be available. 
Lightweight Directory Application Protocol (LDAP)

 connectivity may also be used.

Using Scan to Home

The Scan to Home option must be enabled and setup by the System Administrator in order for the Scan 
to Home template to be available on the device. You must also be logged in on the device using 
Network Authentication to use this option.

1.

Load the original documents in the document feeder or on the document glass.

2.

Press the Clear All (AC) button twice and then Confirm to cancel any previous screen programing 
selections.

3.

To log in select the Log In/Out button 
on the control panel.