Xerox ColorQube 8580 Administrator's Guide
Initial Setup
Xerox
®
ColorQube 8580/8880 Color Printer
13
System Administrator Guide
Initial Setup at the Control Panel
Assigning a Network Address
The printer automatically acquires a network address from a DHCP server by default. To assign a static
IP address, configure DNS server settings, or configure other TCP/IP settings, see
IP
on page 23. If the
printer does not detect a DHCP server, then it uses an IPv4 self-assigned address.
Note:
You can view the printer IP address on the printer control panel or on the Configuration Page.
Viewing the Printer IP Address
You can view the printer IP address on the printer control panel or on the Configuration Page.
To view the IP address on the control panel:
1.
1.
At the printer control panel, to navigate to the Information Menu, use the arrows, then press OK.
2.
Navigate to Printer Identification, then press OK.
3.
To view the IP address, navigate to TCP/IPv4 Address or TCP/IPv6 Address.
Printing the Configuration Page
The configuration page lists printer information such as default settings, installed options, network
settings including IP address, and font settings.
To print the Configuration Page:
1.
1.
At the printer control panel, to navigate to the Information Menu, use the arrows, then press OK.
2.
Navigate to Information Pages, then press OK.
The Configuration Page is highlighted by default.
3.
To print the Configuration Page, press OK.
4.
On the Configuration Page, under General Information, locate the current firmware version.