Xerox ColorQube 8580 User Guide
Troubleshooting
156
Xerox
®
ColorQube 8580/8880 Color Printer
User Guide
Ink or Debris is on the Page
Probable Causes
Solutions
The paper release blade is dirty.
Clean the paper release blade.
The job is set to print 2-sided manually on pre-printed
paper but the paper type is not set to 2nd Side.
•
To print on pre-printed paper, in the print driver or at
the control panel, select 2nd Side as the paper type.
•
To clean ink smears, at the control panel, use the
Remove Print Smears procedure.
See also:
Cleaning the Paper Release Blade
on page 105
Using Manual 2-Sided Printing
on page 90
Removing Print Smears
on page 160
Predominant Light Stripes with Ink Missing from the Print
Probable Causes
Solutions
There is dirt or debris in the exit door area.
Open the exit door, then remove debris from the
paper-exit area.
The printhead is dirty.
At the control panel, run the Eliminate Light Stripes
procedure.
See also:
Cleaning the Paper Release Blade
on page 105
Eliminating Light Stripes
on page 160