Bosch TES 51521 RW VeroCafe LattePro User Manual

TES515.. | 7/2014

The filter is no longer effective when the 
Change filter! 

display appears, or at 

the latest after 2 months. It needs to be 

replaced for reasons of hygiene and so 

that there is no build-up of limescale (this 

could damage the appliance). Replacement 

filters can be obtained from retailers or from 

customer service (see “Accessories”). If no 

new filter is used, turn the filter setting to  
No / Old

.

Note: You can use the filter indicator to 

mark the month in which you inserted the 

filter. You can also mark the month in which 

you will need to replace the filter next (at 

the latest after two months).

Note: If the appliance has not been used 

for a prolonged period (e.g. vacation) the 

filter should be rinsed before the appliance 

is used again. To do so, dispense a cup of 

hot water and pour it away.

You can adapt the appliance to your indi-

vidual needs in the menu settings. 

 

● Hold the k 

off / i button (13) down for at 

least 3 seconds.

 

● Press the k 

off / i button (13) repeatedly 

until the required menu item appears in 

the display. 

 

● Select the required setting with the  upper 

rotary knob (15). 

 

● Confirm by pressing the 

start button (10). 

To leave the menu without making any 

changes, turn the rotary selector to Exit and 

press the 

start button (10). 

You can set the following:

Shut off

: Here you can set the time 

span after which the appliance automati-

cally switches off following the last drink 

preparation. A time between 15 minutes and 

4 hours can be set. The default time can be 

shortened to save energy.

To save power you can specify a shorter 

period.

Filter

: Here you can set whether a water 

filter is being used. If a water filter is not 

being used, turn the setting to No / Old. If a 

water filter is being used, turn the setting to 
Activate filter

. New water filters have to be 

rinsed before use (see “Water filter”).

Start Calc‘n‘Clean

: The service 

programmes (Calc‘n‘Clean / descaling / 
cleaning

) can be selected manually 

here. Press the 

start button (10) and run 

the selected programme (see “Service 

Programmes”).

Temp.

: The brewing temperature (high / 

middle

 / low) can be set here.

Language

: The display language can be set 

here.