TP-LINK TL-WR 740 N User Manual
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
Figure 3-6 Choose WAN Connection Type
The router provides
Auto-Detect function and supports five popular ways PPPoE, Dynamic IP,
Static IP, L2TP and PPTP to connect to the Internet. It’s recommended that you make use of the
Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you can
select the very type and click
Auto-Detect function. If you are sure of what kind of connection type your ISP provides, you can
select the very type and click
Next to go on configuring.
If you select
Auto-Detect, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is successfully
detected by the router.
appropriate configuration page will be displayed when an active Internet service is successfully
detected by the router.
a) If the connection type detected is
Dynamic IP, the next screen will appear as shown in
Figure 3-7. Please select to clone the MAC address or not, according to your situation.
Figure 3-7 Quick Setup – MAC Clone
b) If the connection type detected is
Static IP, the next screen will appear as shown in Figure
3-8. Configure the following parameters and then click
Next to continue.
11