TP-LINK TL-WR 740 N User Manual
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
Security –> Remote Management page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.
Security –> Remote Management page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.
4.8.2 Port Triggering
Choose menu “
Forwarding→Port Triggering”, you can view and add port triggering in the next
screen (shown in
). Some applications require multiple connections, like Internet
games, video conferencing, Internet telephoning and so on. Port Triggering is used for some of
these applications that cannot work with a pure NAT Router.
these applications that cannot work with a pure NAT Router.
Figure 4-34
Port Triggering
To add a new rule, follow the steps below.
1. Click the
1. Click the
Add New… button, the next screen will pop-up as shown in Figure 4-35.
2. Select a common application from the
Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
3. Select the protocol used for Trigger Port from the
Trigger Protocol drop-down list, either
TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the
Incoming Protocol drop-down list,
either
TCP or UDP, or All.
5. Select
Enable in Status field.
6. Click the
Save button to save the new rule.
46