Cisco Cisco Clean Access 3.5

This section describes the following:

 

For a Clean Access Manager High-Availability pair:

Access the primary CAM by opening the web console for the Primary’s IP address.

Access the secondary CAM by opening the web console for the Secondary’s IP address. 

The web console for the standby (inactive) CAM will only display the Administration module menu. 

For a Clean Access Server High-Availability pair:

Access the primary CAS by opening a web console for the trusted-side (eth0) IP address of the 
primary CAS, as follows: 

For example, 

https://172.16.1.2/admin

Access the secondary CAS by opening a web console for the trusted-side (eth0) IP address of the 
secondary CAS, as follows: 

For example, 

https://172.16.1.3/admin

For failover CAS pairs, Device Management > CCA Servers > List of Servers in the CAM web 
console displays the Service IP of the CAS pair first, followed by the IP address of the active CAS in 
brackets. When the secondary CAS takes over, its IP address will be listed in the brackets as the active 
server. 

The following is the generally recommended way to upgrade an existing high-availability (failover) pair 
of Clean Access Managers or Clean Access Servers. 

SSH into each machine in the failover pair. Login as the 

 user with the root password (default is 

)

Verify that the upgrade package is present in the /store directory on each machine. (Refer to 

 for instructions.)