Cisco Cisco Clean Access 3.5
4-20
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 4 Switch Management and Cisco Clean Access Out-of-Band (OOB)
Configure OOB Switch Management in the CAM
Add Group Profile
1.
Go to Switch Management > Profiles > Group > New.
2.
Enter a single word for the Group Name. You can use digits and underscores, but no spaces.
3.
Enter an optional Description.
4.
Click Add. The new Group profile appears under Switch Management > Profiles > Group > List.
Edit Group Profile
1.
To edit the profile later, after actual switches are added, go to Switch Management > Profiles >
Group > List and click the Edit (
Group > List and click the Edit (
) button for the new Group profile.
2.
The Edit page appears.
3.
You can toggle the switches that belong in the Group profile by selecting the IP address of the switch
from the Member Switches or Available Switches columns and clicking the Join or Remove
buttons as applicable.
from the Member Switches or Available Switches columns and clicking the Join or Remove
buttons as applicable.
4.
Click the Update button when done to save your changes.
Note
To delete a group profile, you must first remove the joined switches from the profile.