Cisco Cisco Clean Access 3.5
4-21
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 4 Switch Management and Cisco Clean Access Out-of-Band (OOB)
Configure OOB Switch Management in the CAM
Configure Switch Profiles
A switch profile must first be created under Switch Management > Profiles >Switch> New, then
applied when a new switch is added. A Switch profile classifies switches of the same model and SNMP
settings, as shown in
applied when a new switch is added. A Switch profile classifies switches of the same model and SNMP
settings, as shown in
. The Switch profile configures how the CAM will read/write/change
port settings (such as Access/Auth VLAN) on a switch of this particular type.
Figure 4-12
Switch Profiles List
The Switch profiles list under Switch Management > Profiles > Switch > List provides three buttons:
•
Switches — Clicking this button brings up the list of added switches under Switch
Management > Devices > Switches > List (see
).
•
Edit — Clicking this button brings up the Edit Switch profile form (see
).
•
Delete — Clicking this icon deletes the Switch profile (a confirmation dialog will appear first).