Cisco Cisco Prime Infrastructure 2.0 Release Notes

 lists the Resolved Caveats in Cisco Prime Infrastructure Release 2.0.

Click the identifier to view the details of the caveat. This information is displayed in the 

. 

You can track the status of the resolved caveats, using the Bug Toolkit.

Cisco Catalyst 3850 Series Switch or Cisco 5760 Wireless Controller with huge ACLs and ACEs 
configured takes more time to get synced during inventory collection.

msrpc-smb-netbios and msrpc-smb-netbio both appear in the Applications list, but they refer the same 
application. If you change the ports of the msrpc-smb-netbio application, you get the following error from 
the device: %Unable to remove port-map entry. Port-map entry for application msrpc-smb-netbio is not 
found. If you add the msrpc-smb-netbio application to be part of a Zone-Based Firewall Service, you get 
the following error from the device: % Incomplete command.

Some of the Voice/Video (AVC) reports for ISR-G2 devices show incorrect source and destination address 
values.

Configuring a zone-based firewall policy with WSMA may lead to failures; thus, WSMA support for 
zone-based firewall configuration is disabled in this release. Prime Infrastructure uses plain CLI over 
Telnet/SSH to configure zone-based firewall policies.

A zone-based firewall-enabled device is shown as not having the required license, even though it does have 
the required license.

A partial Inventory collection failure occurs when collecting zone-based-firewall-related inventory 
collection from a device with an ATM interface. This means zone-based firewall manageability on that 
device does not work.

When you deploy an AVC template on a set of devices, the job return successful but when you open one 
of the device configurations, no interfaces where assigned to the AVC policy.

When there are no devices on the server which supports AVC, if you go to Design > Templates > 
Application Visibility > AVC Configuration, a pop-up message displays: “NBAR-applications list file is 
not up-to-date, it is highly recommended to install the latest Prime NBAR-taxonomy software update.”

The Top N Clients Dashlet has 0.0.0.0 as one of the client’s IP addresses.

ASA devices are displayed as unsupported in the Device Work Center.

CSCui91241

Applet files are failing in EEM (Embedded Event Manager) templates.

CSCui91262

Show All templates option is not working in Configuration Groups.

CSCtx58026

The high availability secondary server should be able to run a backup and restore to primary.

CSCua77597

The Client Session traffic reports are drastically different when compared to the report generated by 
Cisco accounting software/third party tools.

CSCub35534

Restore fails with RMAN exception (RMAN-00571) because of missing log files.

CSCub38566

Data Cleanup takes long time.