Cisco Cisco Video Surveillance 2500 IP Camera Release Notes
2
Release Notes for Cisco Video Surveillance IP Camera and IP Dome Firmware Release 2.1.4
OL-22604-01
What’s New in this Release
CIVS-IPC-2520V
CIVS-IPC-2521V
CIVS-IPC-2530V
CIVS-IPC-2531V
What’s New in this Release
Cisco Video Surveillance IP camera and IP dome firmware release 2.1.4 provides fixes for two caveats.
For detailed information, see the
For detailed information, see the
.
Upgrading to Release 2.1.4
The following sections explain how to upgrade your IP camera firmware to Release 2.1.4:
•
•
Upgrading from Release 2.x to Release 2.1.4
If your IP camera is running firmware release 2.x, perform the following steps to upgrade its firmware
to release 2.1.4:
to release 2.1.4:
Step 1
Take these actions to obtain the release 2.1.4 firmware:
a.
Go to this URL:
b.
Click the Download Software link, log in to Cisco.com, and locate the 2.1.4 firmware file, which
is named CIVS-IPC-2.1.4-bin.gz.
is named CIVS-IPC-2.1.4-bin.gz.
c.
Double-click the 2.1.4 firmware file name and follow the on-screen prompts to download it to your
PC.
PC.
Step 2
Take these actions to display the Firmware window in the web interface for your IP camera:
a.
Start Internet Explorer and enter the following in the address field:
protocol://ip_address:port_number
where:
–
protocol is the connection that you use for your IP camera (either HTTPS or HTTP).
–
ip_address is the IP address of your IP camera.
–
port_number is the port number that is used for HTTPS or HTTP connections to the IP camera.
You do not need to enter a port number if you are connecting through the default HTTPS port
443 or the default HTTP port 80.
You do not need to enter a port number if you are connecting through the default HTTPS port
443 or the default HTTP port 80.
b.
Enter your IP camera user name and password when prompted, then click OK.
The IP Camera Main window
c.
Click the Setup link to access configuration menus for the camera.