Cisco Cisco AnyConnect Secure Mobility Client v4.x User Guide
◦On—an IPsec VPN connection is established.
What to Do Next
Choose Connect to save this VPN profile and
.
You can also Save this VPN profile and repeat this procedure to configure additional ones if your environment requires it.
Establish an AnyConnect VPN Connection on BlackBerry Devices
Before You Begin
You must have a VPN Profile configured on your device to establish a VPN connection.
Procedure
Step 1
Go to System Settings > Networks and Connections > VPN.
The VPN Settings screen displays VPN profiles configured on your device manually, downloaded by device management,
or downloaded from the secure gateway an AnyConnect VPN has previously connected to.
The VPN Settings screen displays VPN profiles configured on your device manually, downloaded by device management,
or downloaded from the secure gateway an AnyConnect VPN has previously connected to.
Step 2
Tap a VPN Profile to initiate a VPN connection.
If a connection was previously established, manually or automatically, it will be disconnected before this connection
initiates.
If a connection was previously established, manually or automatically, it will be disconnected before this connection
initiates.
Step 3
(Optional) If the digital certificate from the server, the secure gateway, is unable to be automatically accepted by
AnyConnect, you will be prompted to accept the certificate and complete the connection, or reject the certificate and
terminate the connection.
AnyConnect, you will be prompted to accept the certificate and complete the connection, or reject the certificate and
terminate the connection.
Step 4
(Optional) Read and acknowledge the informational banner if one is displayed.
Step 5
(Optional) Depending on your secure gateway configuration you may need to choose a tunnel group.
This information should be provided by your administrator.
This information should be provided by your administrator.
Step 6
(Optional) If prompted, do one of the following to authenticate your connection:
• Enter your username and password credentials. You may be prompted for secondary credentials as well.
• Tap Get Certificate and enter the certificate enrollment credentials supplied by your administrator. AnyConnect saves
the certificate and reconnects to the VPN secure gateway to use the certificate for authentication.
Once the connection has been established, the associated VPN Profile will be displayed in green.
Depending on the VPN secure gateway configuration, AnyConnect may add VPN Profiles to the VPN Settings.
Tapping another VPN profile disconnects the current VPN connection and connects to the VPN secure
gateway associated with the one that you tapped.
gateway associated with the one that you tapped.
Note
4