Cisco Cisco ONS 15310-MA SONET Multiservice Platform Installation Guide
10
Upgrading the Cisco ONS 15310-MA to Release 8.0
78-17758-01
DLP- U346 Activate the New ONS 15310-MA Software Load
Note
During a software upgrade, a reset alarm is raised on all the cards. When upgrading from release 6.0.x,
6.1.x, 6.2.x, 7.0, 7.2, 7.2.x to 8.x, a MANRESET alarm is raised on Standby TCC cards and an
AUTORESET alarm in all the other cards. However, from release 8.0, the MANRESET alarm is not
raised and the AUTORESET alarm is raised on all the cards.
6.1.x, 6.2.x, 7.0, 7.2, 7.2.x to 8.x, a MANRESET alarm is raised on Standby TCC cards and an
AUTORESET alarm in all the other cards. However, from release 8.0, the MANRESET alarm is not
raised and the AUTORESET alarm is raised on all the cards.
Step 9
In CTC, choose File > Exit.
Note
Steps
through
are only necessary after upgrading the first node in a network because cached files
only need to be removed from your workstation once. For the remaining nodes, you will still be
disconnected and removed to the network view during the node reboot, but after the reboot is complete,
CTC will restore connectivity to the node.
disconnected and removed to the network view during the node reboot, but after the reboot is complete,
CTC will restore connectivity to the node.
Step 10
In the CTC browser window, click the Delete CTC Cache button. A confirmation dialog box appears.
Step 11
Click Yes to confirm.
Note
You must ensure that CTC is closed before clicking the Delete CTC Cache button. CTC behavior
will be unreliable if the button is clicked while the software is still running.
will be unreliable if the button is clicked while the software is still running.
Note
It might also be necessary to delete cached files from your browser’s directory, or from the
“temp” directory on your Microsoft Windows workstation. If you have trouble reconnecting to
CTC, complete the
“temp” directory on your Microsoft Windows workstation. If you have trouble reconnecting to
CTC, complete the
Step 12
Close your browser and then reopen it.
Step 13
(Optional) Run the Cache Loader pre-caching utility, which can improve your speed logging back into
CTC after an upgrade. Perform the following steps to run the Cache Loader.
CTC after an upgrade. Perform the following steps to run the Cache Loader.
a.
Load the Software R8.0 CD into your CD-ROM drive. If the directory of the CD does not open
automatically, open it.
automatically, open it.
b.
Double-click the setup.exe file to run the Installation Wizard. The CTC Installation Wizard dialog
box opens.
box opens.
c.
Click the Next button. The Setup Options dialog box opens.
d.
Choose Custom, and click the Next button. The Custom Options dialog box opens.
e.
Select Cisco Transport Controller, and CTC JAR files (deselect any other preselected options),
then click the Next button. A confirmation dialog box opens.
then click the Next button. A confirmation dialog box opens.
f.
Click the Next button again. The CTC Cache Loader pre-caches the JAR files to your workstation,
displaying a progress status dialog box.
displaying a progress status dialog box.
g.
When the utility finishes, click OK, and then in the wizard, click Finish.
Step 14
Reconnect to CTC using the IP address from
. The new CTC applet for Software R8.0 uploads.
During this logon, enter your Superuser user ID and password.
Step 15
Return to your originating procedure (NTP).