Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Troubleshooting Guide
Impact Matrix When TCC2/TCC2P is Inserted into
Locked/Unlocked Shelf
Locked/Unlocked Shelf
Document ID: 64590
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Impact Matrix
Findings
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Impact Matrix
Findings
Related Information
Introduction
This document describes the impact matrix when you insert the Timing, Communications, and Control Card
Version Two (TCC2) into the locked or unlocked shelf, versus the Timing, Communications, and Control
Card Version Two Plus (TCC2P). TCC2P is a next−generation system processor for the Cisco ONS 15454
Multiservice Provisioning Platform (MSPP).
Version Two (TCC2) into the locked or unlocked shelf, versus the Timing, Communications, and Control
Card Version Two Plus (TCC2P). TCC2P is a next−generation system processor for the Cisco ONS 15454
Multiservice Provisioning Platform (MSPP).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco ONS 15454
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Background Information
When you install TCC2P, you can provision front access and backplane Ethernet ports in Repeater mode or in
Secure mode.
Secure mode.