Cisco Cisco Expressway Release Notes
Resolved issues
Cisco TelePresence Cisco Expressway Software Release Notes (X8.2)
Page 4 of 16
Support to modify Maximum transmission unit (MTU) size
You can configure the maximum transmission unit (MTU) for each network interface on the
System > IP
page.
Diagnostic logging
The tcpdump facility has been removed from the
Diagnostic logging
tool.
Jabber Guest
Jabber Guest support has been removed (it was previously provided as a feature preview in X8.1). It will be
reintroduced in a future release of Expressway software.
reintroduced in a future release of Expressway software.
Resolved issues
Resolved in X8.2
Identifier
Description
CSCum90139 Symptoms: Expressway X8.1 uses the Ethernet 2 IP address for the media part in SDP rather
than the configured Static NAT IP address. This results in calls failing on the media part.
Conditions: Running Expressway X8.1 with Static NAT and encryption B2BUA enabled (a media
encryption policy other than Auto).
encryption policy other than Auto).
Workaround: Recommended configuration for Expressway-C with Expressway-E deployments
is to configure the same media encryption policy setting on the traversal client zone on
Expressway-C, the traversal server zone on Expressway-E, and every zone on Expressway-E,
and to only use static NAT on the Expressway-E. With this configuration the encryption B2BUA
will only be enabled on the Expressway-C.
is to configure the same media encryption policy setting on the traversal client zone on
Expressway-C, the traversal server zone on Expressway-E, and every zone on Expressway-E,
and to only use static NAT on the Expressway-E. With this configuration the encryption B2BUA
will only be enabled on the Expressway-C.
Table 1: Issues resolved in X8.2