Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Installation Guide
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the Alarm Interface Panel Standoffs for
the Cisco ONS 15454
the Cisco ONS 15454
Product Number: 15454-SA-ANSI
This document describes how to install the alarm interface panel (AIP) standoffs to allow for diverse
power routing.
power routing.
Step 1
Loosen and remove the screws that attach the clear cover to the ONS 15454 backplane. Remove the clear
cover.
cover.
Step 2
Route the power wires as necessary.
Step 3
Attach the standoffs (50-1297-01) to the backplane.
Step 4
Replace the clear cover on the backplane, and insert and tighten the screws the screws that you removed
in
in
).