Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Installation Guide
Corporate Headquarters:
Copyright © 2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the Cisco ONS 15454 Deep Door Kit
Product Number: 15454-DOOR-KIT
This document describes how to install the deep door kit for the Cisco ONS 15454. A door is
pre-installed on the ONS 15454 but the 15454-DOOR-KIT provides a deeper door and additional extended
fiber clips.
pre-installed on the ONS 15454 but the 15454-DOOR-KIT provides a deeper door and additional extended
fiber clips.
The deep door kit includes the following components. The numbers in parentheses represent the part number
and quantity (if greater than one).
and quantity (if greater than one).
•
Deep door (800-25281-XX)
•
Gray fiber clips (52-0620-XX) (5)
•
White fiber clips (52-0621-XX) (5)
•
Deeper bracket, right side (700-18765-XX)
•
Deeper bracket, left side (700-18766-XX)
•
Screws (48-0007-XX) (12)
This document contains the following sections:
•
•
•
•
Use this document in conjunction with the Cisco ONS 15454 Procedure Guide and the Cisco ONS 15454
Reference Manual.
Reference Manual.
Installing the Deep Door
Caution
Always use an electrostatic discharge (ESD) wristband when working with a powered ONS 15454.
Plug the wristband cable into the ESD jack located on the lower-right outside edge of the shelf
assembly.
Plug the wristband cable into the ESD jack located on the lower-right outside edge of the shelf
assembly.