Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
■
Cisco TelePresence MXP (F7 and later)
■
Cisco TelePresence TC endpoints (TC3 and later)
■
Cisco TelePresence TE endpoints (TE4 and later)
Initial Cisco TMS Setup
The Cisco TMS configuration can generally be modified at any point after deployment and during operation. However,
for ease of maintenance and operation, we recommend that you configure user account policies, zones, and basic
conference defaults immediately after installation and before allowing users into the system.
for ease of maintenance and operation, we recommend that you configure user account policies, zones, and basic
conference defaults immediately after installation and before allowing users into the system.
Instructions can be found in the built-in Cisco TMS help or Cisco TMS Administrator Guide.
User Management
We strongly recommend using Microsoft Active Directory to manage all Cisco TMS users.
Zones
You can configure an initial zone setup during installation. To view or modify the configuration after installation, go to
Administrative Tools > Locations > ISDN Zones
or
> IP Zones
.
Folder Hierarchy
Before beginning to add systems to Cisco TMS, we strongly recommend planning a well-structured and scalable
folder hierarchy for endpoints and infrastructure systems in
folder hierarchy for endpoints and infrastructure systems in
Systems > Navigator
.
Default Settings for Conferences
Before users start booking conferences, we recommend that you review and adjust the default settings for con
nection type, bandwidth, and so on. Go to
nection type, bandwidth, and so on. Go to
Administrative Tools > Configuration > Conference Settings
.
21
Cisco TelePresence Management Suite Installation and Upgrade Guide
Deployment best practices