Cisco Cisco TelePresence Management Suite (TMS) Version 15
Configuring Cisco VCS for provisioning
Cisco TelePresence Management Suite Agent Legacy Deployment Guide (13.2)
Page 13 of 55
4. Click the Add Systems button in the right pane. Follow the instructions in Cisco TMS to add the Cisco
VCS.
5. Ensure that the Host Name of the Cisco VCS is set up in Cisco TMS:
a. Go to
Systems > Navigator
.
b. Select the VCS.
c. Select the
c. Select the
Connection
tab.
6. Set Host Name to be the FQDN of the Cisco VCS, for example vcs1.example.com.
7. Click Save/Try.
Enabling provisioning on the Cisco VCS
Setting up a Cisco VCS cluster and enabling provisioning are separate processes and should not be
attempted simultaneously. If you want to set up a Cisco VCS cluster, first set up the cluster name and
complete the provisioning configuration as described below. Then set up the cluster as described in
attempted simultaneously. If you want to set up a Cisco VCS cluster, first set up the cluster name and
complete the provisioning configuration as described below. Then set up the cluster as described in
Setting up a cluster name
If you are going to use FindMe, you must set the Cisco VCS up with a cluster name regardless of whether it
is part of a cluster. The cluster name must be:
is part of a cluster. The cluster name must be:
n
unique compared to any other Cisco VCS or Cisco VCS cluster managed by this Cisco TMS.
n
identical to the SIP server address configured in Cisco TMS (
Systems > Provisioning > Directory >
Configurations
pane, the SIP Server Address field).
If a cluster name exists, but is different from the SIP server address, it must be changed so that they are
identical. To set up or change the cluster name:
identical. To set up or change the cluster name: