Cisco Cisco TelePresence Management Suite (TMS) Version 15
Setting up and maintaining the Provisioning Directory
Cisco TelePresence Management Suite Agent Legacy Deployment Guide (13.2)
Page 34 of 55
To create the actual FindMe Profiles and FindMe Devices from the templates he configured, he must click
Regenerate FindMe. All users will be created with each device address contained in the template even if
they don't physically have all the devices.
Regenerate FindMe. All users will be created with each device address contained in the template even if
they don't physically have all the devices.
Note: We recommend that whenever changes are made and saved in the FindMe Template Configuration,
the Administrator selects Regenerate FindMe to ensure all changes are updated appropriately. Selecting
Regenerate FindMe will replace existing FindMe users' configurations as well as apply configurations to any
new users.
the Administrator selects Regenerate FindMe to ensure all changes are updated appropriately. Selecting
Regenerate FindMe will replace existing FindMe users' configurations as well as apply configurations to any
new users.
Tore has now imported users from AD, created a dial plan, system configurations and FindMe templates.
Now he needs to send the users their account information details.
Now he needs to send the users their account information details.
Sending account information
Before account information can be sent to the users, email settings must be configured in the Provisioning
Directory:
Directory:
1. In Cisco TMS, go to
Systems > Provisioning > Directory
.
2. Select the root folder.
3. Click Send Account Info.
4. Click Configure Email Settings.
5. Enter the appropriate information. A sample template is shown below.
l
The message template must include {username} and {password}, placeholders that will be replaced by
each individual's provisioning credentials.
each individual's provisioning credentials.
l
If you have configured FindMe for your users, we also recommend including the link to the user FindMe
UI on the Cisco VCS in the message.
UI on the Cisco VCS in the message.
6. Click Save.