Cisco Cisco Unified MeetingPlace 5.3 Maintenance Manual

Start the terminal emulator program.

Set the port parameters in the terminal emulator program as shown in 

. The CLI appears.

CLI commands are case sensitive. For CLI command information, see the Configuration Guide 
for Cisco MeetingPlace Audio Server Release 5.3.

Keep a record of activity during the fan tray replacement by capturing the text in the terminal emulator 
program. This information can be used by Cisco TAC to diagnose problems that may occur during this 
replacement. Follow these steps:

Go to the Transfer menu in the HyperTerminal window.

Select Capture Text.

Save the file. Note the location so that you can retrieve the file later.

Click Start.

At the CLI prompt, log in as an administrator. The tech$ prompt appears.

For Cisco MeetingPlace Release 5.2, the default administrator username is tech and the default 
administrator password is wit!tra$. For Cisco MeetingPlace Release 5.3, the default 
administrator username is admin and the default administrator password is cisco. See the 
Installation and Upgrade Guide for Cisco MeetingPlace Audio Server Release 5.3 for more 
information about logging in to Cisco MeetingPlace.

At the tech$ prompt, enter activity. The VUI Internal Status Utility menu appears.

To see a quick status of all ports, enter 1. A list of the ports appears. The ports are listed numerically 
under the Port heading and the port status is under the Ap heading. 

 lists the most common Ap 

headings.

Verify that all the ports are inactive by ensuring that all ports have -- under the Ap heading. Press Enter 
to go to the next page. When you have scrolled through all the ports, the VUI Internal Status Utility menu 
appears.

Baud

19200

Data length

8 bit

Parity

None

Stop bits

1

--

The port is inactive.

CO

The port is participating in an active conference.

PR

The port is currently accessing a meeting profile.