Cisco Cisco Collaboration Server Dynamic Content Adapter Installation Guide
DCA 2.01 Installation and Integration Guide
8
How to Deploy the DCA
At its highest level, moving towards a live deployment of the DCA involves the basic
steps described below. Consult the DCA Administration and Configuration Guide for
more detailed instructions on configuring the DCA.
steps described below. Consult the DCA Administration and Configuration Guide for
more detailed instructions on configuring the DCA.
Step 1
Install Cisco Collaboration Server
If you are not a current CCS user, you must install CCS prior to
implementing the DCA. Cisco recommends that, whenever
possible, you use a fresh CCS installation with the DCA.
implementing the DCA. Cisco recommends that, whenever
possible, you use a fresh CCS installation with the DCA.
Step 2
Install the DCA
The DCA should be installed on its own server. Installation tasks
include:
include:
1. Installing prerequisite software.
2. Running the DCA Installer.
3. Installing the license file.
4. Testing the installation.
Based on how you choose to deploy the DCA, you may also need
to:
to:
•
Enable firewall ports for the DCA.
•
Configure the DCA for a proxy server.
Step 3
Integrate the DCA with CCS
After installing the DCA, you must integrate with the Collaboration
Server. Depending on your CCS version, integration tasks include:
Server. Depending on your CCS version, integration tasks include:
1. Assessing and possibly backing-up CCS customization that
may be overwritten by the DCA-CCS Updater.
2. Running the DCA-CCS Updater on the CCS server.