Cisco Cisco Unified MeetingPlace Web Conferencing Maintenance Manual

Chapter 6  Managing MeetingPlace Web   91

If you need to change any network information regarding the 
MeetingPlace server or the Windows gateway, you need to first 
remove the unit by clicking the “Delete Unit” button.  After the 
unit is removed from the MeetingPlace server’s database, you can 
then enter any changes and click the  “Add Unit” button. The 
Windows gateway unit will register itself into the MeetingPlace 
server’s database.

1.  Before implementing any changes, you must detach the 

Windows gateway unit from the MeetingPlace server.

a. Stop the MeetingPlace Gateway SIM Service.

b. Click the “Delete Unit” button

2.  Make any desired network changes, such as changing the  

Ethernet address, IP address or host name.

3.  Click the “Add Unit” button.

4.  Verify that this Windows gateway unit is attached to the 

MeetingPlace server and that a unit number has been 
assigned.

Remote Management Enabled. A check in this box enables a 
MeetingPlace support representative to issue remote management 
requests that can help diagnose problems and restart 
MeetingPlace Web services.

Gateway Alarms Enabled. A check in this box enables 
MeetingPlace Web alarms to be logged to the MeetingPlace 
Alarm Table.

From the Agent Service tab in the MeetingPlace Gateway 
Configurations interface, you can:

Change how connections are maintained to the MeetingPlace 

OL-6033-01                           Cisco MeetingPlace Web 3.0 System Manager's Guide