Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Troubleshooting Guide
TCP/UDP Port Number on Cisco ONS 15454
Document ID: 61927
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
TCP/UDP Ports on the ONS 15454
HTTP
CORBA
CTC Launched from CTM Client Domain Explorer
Prerequisites
Requirements
Components Used
Conventions
TCP/UDP Ports on the ONS 15454
HTTP
CORBA
CTC Launched from CTM Client Domain Explorer
Software Download/Backup/Restore Port on TCC (NE)
FTP
TELNET
SNMP
TL1
DHCP
NTP/SNTP
Related Information
FTP
TELNET
SNMP
TL1
DHCP
NTP/SNTP
Related Information
Introduction
Cisco ONS 15454 nodes use TCP/IP to communicate with a variety of devices, such as Cisco Transport
Controller (CTC) and Cisco Transport Manager (CTM). This document summarizes the port number usage
for TCP/UDP to create proper filtering.
Controller (CTC) and Cisco Transport Manager (CTM). This document summarizes the port number usage
for TCP/UDP to create proper filtering.
Note: The information in this document is subject to change in future software and hardware releases.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco ONS 15454.
•
Introduction to TCP/IP.
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454.
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.