Cisco Cisco Collaboration Server Dynamic Content Adapter Installation Guide
DCA 2.01 Installation and Integration Guide
13
About DCA Server Hardware
Requirements
The recommended hardware configuration for your DCA 2.01 is as follows:
Windows Platform
Minimum
•
Processor: Dual 866 MHz Pentium 3
•
Memory: 1 GB RAM (minimum)
•
Available Disk Storage Space: 2 GB
Enterprise
•
Processor: Dual 2.4 GHz Pentium 4
•
Memory: 1 GB RAM (minimum)
•
Available Disk Storage Space: 4 GB
Solaris Platform
Minimum
•
Processor: 2 x Ultra Sparc III
•
Memory: 1 GB RAM (2 GB is recommended)
•
Available Hard Disk Storage Space: 36 GB
Number of Sessions for both Windows and Solaris Platform
As a rough guideline, the DCA 2.01 minimum configuration should deliver adequate
performance for 40 concurrent sessions. The Enterprise configuration should deliver
adequate performance for 100 or more concurrent sessions. Results of Cisco load
tests performed against the Minimum configuration are described in the DCA 2.01
Administration and Configuration Guide.
performance for 40 concurrent sessions. The Enterprise configuration should deliver
adequate performance for 100 or more concurrent sessions. Results of Cisco load
tests performed against the Minimum configuration are described in the DCA 2.01
Administration and Configuration Guide.
Caution:
Cisco requires that the DCA has its own dedicated server. You CANNOT
install the DCA and Cisco Collaboration Server (CCS) on the same server.